**Price of a utility pole** – The price ranges from $350 to $1,800. That’s all there is to it. When you factor in labour and equipment costs, replacing a pole that has been knocked down by a storm or an automobile can cost up to $3,000.

## It’s also important to know how much it costs to build a utility pole.

Depending on the class and length of pole, as well as your proximity to the contractor, expect to pay anywhere from $1,500 to 2,500 for the entire job.

One can also wonder how much a used telephone pole costs. Many will give you the old pole for free, but some will charge you $0.50 per foot on average. Giving them away is less expensive than paying to dispose of them.

## You might also wonder how much a utility pole weighs.

Let’s suppose it’s a pine pole, 30 feet tall and 1 foot in diameter, for a rough estimate (0.5 ft radius). That pole’s volume is 30 * pi * 0.52, or 24 cubic feet. Because pine has a density of 30 pounds per cubic foot, this hypothetical pole would weigh 30 * 24 = 720 pounds.

## In a mile, how many utility poles are there?

Each quarter mile has ten poles, for a total of 40 poles per mile. 40 divided by 5280 feet equals 132 feet of pole spacing!

Read More: Is It True That the 65 Polyester 35 Cotton Scrubs Will Shrink?

## Related Questions to Price of a Utility Pole

### What is the procedure for obtaining a temporary electrical connection?

After obtaining approval from the board, you must submit an application form (specified form obtained from the board), along with the approved plan of house construction, and pay the expenses.

### What is the cost of a metre pole?

Poles with a diameter of 25 feet and poles with a fused disconnect

Price Description

$60.00 Pole, 25 Feet (No Disconnect or Meter Base)

$360.00 Pole with metre base and 240V/200 Amp Disconnect, 25 ft.

$550.00 Pole with 480V/30 Amp Disconnect, 25 Ft.

$620.00 Pole with 480V/60 Amp Disconnect, 25 Ft.

### How much does it cost to connect a house to the power grid?

This goes from $3,500 to $8,000 for a 1,200-square-foot home. The entire cost will be reduced if an electrician can access and run them through a basement, crawl space, attic, or floor joists. The project cost could rise by up to $20,000 for larger properties or those with limited access to wiring.

### What does it cost to keep underground utilities running?

Cost Per Foot of Underground Utilities Conduit Installation

The typical cost of installing conduit for utilities is $8 per foot, which includes equipment, labour, trenching, and utility installation.

### What is the cost of a new power pole?

According to Pepco spokesman Bob Hainey, most Pepco poles cost between $2,000 and $60,000 to move, including restringing electrical cables and moving adjacent poles.

### What is the ideal depth for a pole in the ground?

For posts that reach 8 feet or more above ground level, holes should be at least 3 feet deep. A hole at least 2 1/2 feet deep should be drilled into posts that extend 6 feet above ground level.

### What is the depth of a telephone pole’s burying?

Utility poles are buried according to a certain formula: 10% of the pole’s height plus two feet equals the proper burial depth. Because a conventional utility pole is 40 feet long, a standard hole will be around 6 feet deep.

### What is the minimum height requirement for a temporary electricity pole?

Depending on the weatherhead height requirement, the pole length must be at least 17′ or 21′.

### What is the weight of a 40-foot telephone pole?

They range in weight from 1,695 to 6,585 pounds. Many of them have Comcast and AT&T utility lines in addition to power. They are set at a depth of 10% of the pole length plus 2 feet. As a result, a 40-foot pole is placed in a 6-foot hole and surrounded by compacted gravel.

### What is the weight of a wooden light pole?

Let’s suppose it’s a pine pole, 30 feet tall and 1 foot in diameter, for a rough estimate (0.5 ft radius). That pole’s volume is 30 * pi * 0.52, or 24 cubic feet. Because pine has a density of 30 pounds per cubic foot, this hypothetical pole would weigh 30 * 24 = 720 pounds.

### Why do electric poles have hollow cores?

Hollow cylinders are more durable than solid cylinders because twisting them necessitates a greater amount of torque. Electric poles are formed of hollow cylinders because they have higher strength and longevity.

### What is the weight of a telegraph pole?

The solutions to a handful of them are listed here. What are the dimensions of telegraph poles? There is no one-size-fits-all answer. However, a pole of 30 feet (9 metres) would be a decent average length.

### What is the average height of a light pole?

The height of the pole

Street pole heights typically range from 9 to 14 feet. The street light pole should, in theory, produce enough light without causing excessive glare.

### How much does a concrete electric pole weigh?

The PCC pole weighs 380 kg, while the RCC pole weighs between 420 and 450 kg. The pole includes three holes at the top to attach a cross arm with a diameter of 18 mm, as illustrated in the diagram.

### What is a telephone pole’s diameter?

A class 1 pole, for example, has a minimum top circumference of 27 inches. The circumference measured 6 feet from the bottom must be at least 43.5 inches if it is 25 feet long and cedar (most utility poles are cedar).

### What is the best way to get rid of telephone poles?

It can be difficult to get rid of ageing utility poles. You can’t just throw them out, pile them up on the side of the road, or worse, set them on fire if they’ve been treated with CCA, Creosote, or Penta.

### What is the cost of a telephone?

Simple telephone service, sometimes known as POTS lines, costs around $40 per month per line. A PRI (23 lines) costs around $450 per month for digital services.